Fixing Stage Inspection Melbourne
Request a Quick Quote
"*" indicates required fields
Independent Inspections Across Melbourne and All Suburbs
Building or renovating in Melbourne? The fixing stage is when your new place starts to look finished, plasterboard’s up, cabinets are in, internal doors swing properly, and you’re almost at the painting stage. But this is also when costly shortcuts and hidden defects can sneak through. Don’t risk missing a problem that’ll bite you later.
A professional fixing stage inspection by Buy Wise gives you peace of mind that your builder’s work is up to standard, and protects your investment for years to come.
Why a Slab Stage Inspection Matters
The fixing stage is a key milestone in every Melbourne build or renovation. This is when internal linings, skirting boards, architraves, cabinetry, waterproofing, and doors are installed.
It’s the last proper chance to spot problems before everything gets covered up with paint, tiles, or floor coverings. If you wait until after the finishing touches, some defects can become your responsibility, and your expense.
What We Inspect During a Fixing Stage Inspection
Our licensed Melbourne inspectors check every key detail for compliance with Australian and Victorian standards.
We inspect:
Plasterboard installation and finish – no cracks, correct fixing, flat surfaces
Cabinetry fitting and alignment in kitchens, bathrooms, and laundries
Skirting boards, architraves, and all internal door fitment
Wall straightness, cornices, and ceiling finish
Window reveals, frames, and sills
Surface preparation before tiling or painting
Waterproofing checks for wet areas
Proper fastening and hardware throughout the house
We service every part of Melbourne:
From Bayside to Berwick, Brunswick to Brighton, Point Cook, Glen Waverley, the Mornington Peninsula, and everywhere in between.
The Inspection Process
What Happens on the Day?
After booking, we’ll arrange a time that suits you and your builder. Our inspector attends your property, whether it’s a new townhouse in Richmond or a family home in Narre Warren, and completes a thorough walkthrough.
We check every room and detail, taking photos and notes of any issues. If you want, we can discuss findings on site with your builder or supervisor.
Within 72 hours, you’ll receive a detailed, photo-based report. It highlights defects, explains what needs fixing, and references the latest codes. Our reports are clear, jargon-free, and accepted by all major builders.
Common Defects We Find in Melbourne Builds
Melbourne’s building boom means more properties, but also more rushed work and shortcuts. Some issues we regularly spot:
Uneven plaster and poorly set cornices in high-rise apartments around Southbank and Docklands
Missed or rushed waterproofing in bathrooms and laundries, especially in new estates in Point Cook and Tarneit
Cabinetry alignment problems in kitchens from Glen Iris to Craigieburn
Doors that don’t swing properly or poor hardware installation in many volume builds
Most of these issues are easy (and cheap) for your builder to fix at the fixing stage, but become much more expensive after handover.
Why Fixing Stage Inspections Are Critical
Catching problems now can save you thousands and a heap of stress. Here’s what you avoid:
Hidden leaks and water damage down the track
Crooked cabinets, doors, and trim that ruin your finished look
Arguments with your builder over defects you didn’t know about
Unplanned repair bills after moving in
Why Choose Buy Wise for Your Fixing Stage Inspection?
Truly independent inspectors, decades of experience in Melbourne
Comprehensive, jargon-free reports with photos
Reports delivered in 72 hours
Fully insured and licensed
Friendly team that explains everything, not just the problems
We work for you, not your builder
Client’s Feedback
How Much Does a Fixing Stage Inspection Cost in Melbourne?
Our fixing stage inspections start from $399 including GST, with no hidden fees.
For larger or more complex properties, we’ll give you an upfront quote so there are no surprises.
Ask about our package discounts if you want to combine multiple stage inspections (like frame, lock-up, fixing, and pre-handover).
Did You Know?
Most major problems in new homes are due to rushed work during the fixing stage. Cabinetry is often installed fast to meet deadlines, waterproofing corners can be skipped, and plastering might not be up to standard. These shortcuts aren’t always obvious, but our inspectors know exactly where to look.
Fixing Stage Inspection Checklist
Here’s what you should have ready on inspection day:
Full access to the property (no locked rooms or garages)
Building plans or paperwork from your builder
A list of any concerns or issues you’ve noticed
Arrange for your builder or supervisor to be there, if possible
We’re happy to talk you through the findings onsite, or just send the report if you’re busy.
Case Study: Real Savings for a Melbourne Family
In late 2024, we inspected a townhouse in St Kilda. Our inspector found poor waterproofing in the laundry and kitchen cupboards that were misaligned. The builder fixed both before handover, saving the owners about $3,200 in future repairs.
“Getting the inspection before handover was the best thing we did. The builder fixed everything straight away.”
– Lisa, St Kilda
Book Your Fixing Stage Inspection in Melbourne
Don’t risk expensive surprises or hidden defects.
Book your fixing stage inspection today:
Call 1800 2*** ** Or Book Online
Fast service across all Melbourne suburbs.
FAQs – Fixing Stage Inspections
Do you service my area in Melbourne?
Yes, we cover all metro Melbourne and surrounding suburbs including Bayside, Eastern Suburbs, Western Suburbs, and the Mornington Peninsula.
What if waterproofing has already been covered?
Ideally, we inspect before tiling. If it’s already covered, we’ll look for signs of poor preparation and let you know your options.
Is this the same as a PCI (handover) inspection?
No, fixing stage comes before PCI. We recommend both for full peace of mind.
What kind of report will I get?
You’ll get a detailed, photo-based report referencing building codes and clear rectification instructions.
Do you check all internal doors and cabinets?
Yes, we check every internal door, handle, hinge, and cabinet, including swing, fitment, and fixing.
What if there’s no tiling done yet?
That’s ideal! We can check that waterproofing and surfaces are correct before they’re covered up.
Your Local Melbourne Building Inspectors.
Protect your new home and your future.
Get A Sample Report Today